Validating and Cross-Validating with SYSGEN
Cross-Validate in SYSGEN
Cross-Validate in SYSGEN
Cross-validation is automatically done on the KEEP, TAPE, I/O, and RDCC commands in SYSGEN.
Cross-validation ensures that there are no conflicts in the use of node names, device classes, and physical paths between the data currently contained in NMCONFIG.PUB.SYS and the system configuration data.
To cross-validate, use the SYSGEN facility (OP capability is required). To use SYSGEN, type the following commands at the MPE prompt:
:sysgen | sysgen> io |
| io> ld (optional) |
| io> exit |
| sysgen> exit |
The optional ld (list devices) command allows you to verify the NMMGR devices that are configured. For more information, see System Startup, Configuration, and Shutdown.
If you have completed the configuration process, proceed to Chapter 14 , “Operating the Network.”