6 Configuring a LAN Node
This chapter provides step-by-step instructions for configuring local area network (LAN), Token Ring, Fiber Distributed Data Interface (FDDI), 100VG-AnyLAN, and 100Base-T links. This manual assumes that you are using the guided configuration capabilities of NMMGR.
Figure 6-1shows the screen flow for configuring LAN, Token Ring, FDDI, 100VG-AnyLAN, and 100Base-T screens. Screens unique to the configuration of LAN, Token Ring, FDDI, 100VG-AnyLAN and 100Base-T are indicated by bold boxed screens. [FUNCTION] denotes the function key used at a screen to invoke the next screen on the screen flow.
Figure 6-1 Configuring Screen Flow
[VALIDATE NETXPORT]
Validate Link,
Cross-validate
with SYSGEN
Open Config/
Directory File Screen
[OPEN CONFIG]
Main Screen
[NS]
NS Config
[GUIDED]
Network Transport
Config
[CONFIG NETWORK]
(Network Interface)
Config
[NEIGHBOR GATEWAY]
Neighbor Gateways
[ADD or MODIFY]
Neighbor Gateway
Reachable Networks
If you have not created the config file, then press the OPEN CONFIG key a second time.
Enter Network Interface: LAN, Token Ring or FDDI
