Planning for Node Configuration
Node Worksheet Information
Node Worksheet Information
Table
Table | Configuration Worksheet Information | |||
|
|
|
|
|
| Field |
| Screen | Description |
|
|
|
|
|
| Address key |
| X.25 Virtual Circuit | In the network directory, the name of |
|
|
| Configuration | each node listed in the remote node |
|
|
|
| name field. HP recommends that you |
|
|
|
| use the node portion of the remote |
|
|
|
| node’s node name as the address key. |
|
|
|
|
|
| Card number |
| X.25 Configuration | Slot number of the DTC/X.25 Network |
|
|
|
| Access card. |
|
|
|
|
|
| DTC node name |
| X.25 Configuration | Node name of the DTC in the form |
|
|
|
| node.domain.organization. Must |
|
|
|
| agree with node name configured |
|
|
|
| through during configuration of the |
|
|
|
| datacommunications and terminal |
|
|
|
| subsystem (DTS). The node name |
|
|
|
| must be entered for each DTC/X.25 |
|
|
|
| network access card that allows |
|
|
|
| |
|
|
|
|
|
| Enable ethernet/ |
| LAN Configuration | Both ethernet and IEEE 802.3 are |
| Enable IEEE 802.3 |
| enabled by default. You may disable | |
|
|
|
| one or the other but not both (one |
|
|
|
| must be enabled). To disable either |
|
|
|
| ethernet or IEEE 802.3, enter an N |
|
|
|
| (no) in the field next to the enable |
|
|
|
| question. |
|
|
|
|
|
| Facility set |
| X.25 Virtual Circuit | For SVCs only. A name for a collection |
|
|
| Configuration | of X.25 connection parameters in the |
|
|
|
| network directory. Use the default |
|
|
|
| (STDSFSET) or enter a different |
|
|
|
| name, then go to Facility sets to define |
|
|
|
| parameters. It must match the |
|
|
|
| parameters specified by your network |
|
|
|
| subscription. |
|
|
|
|
|
62 | Chapter 4 |