HP E3000 MPE/IX, E3000/IX manual 64

Planning for Node Configuration

Node Worksheet Information

Table 4-1		Configuration Worksheet Information
	Field		Screen	Description
	(FDDI Link name)		FDDI Configuration	This represents the FDDI card for
				which you are configuring a link.
	(100VG-AnyLAN		LAN Configuration	This represents the 100VG-AnyLAN
	Link name)			card for which you are configuring a
				link.
	(100Base-T Link		LAN Configuration	This represents the 100Base-T card
	name)			for which you are configuring a link.
	(X.25 Link name)		X.25 Configuration	The name of the link used by X.25 iX
				System Access. It must match the link
				name configured during configuration
				of the datacommunications and
				terminal subsystem (DTS).
	(Point-to-Point Link		Point-to-Point Configuration	This represents the PSI card for
	name)			which you are configuring a link.
	Local node name		Main	The node name is the name by which
				the HP e3000 computer is known in
				the network. The format of a node
				name is
				nodename.domain.organization
				where the total number of characters
				is 50 or fewer, and each field contains
				16 or fewer characters (alphanumeric,
				underscore, or hyphens). The first
				character of each field must be
				alphabetic.
	Local domain name		NS Configuration	The name of the system in ARPANET
				standard format. It is composed of
				labels, with each label separated by a
				period. Labels must start with a letter
				or digit and have as interior
				characters only letters, digits,
				hyphens(-), or underbars (_). There
				may be any number of labels, but the
				total length of the name, including
				periods, is limited to 255 characters.
				(If not using domain names for
				network access, leave the local node
				name in this field.)

64 Chapter 4