HP E3000 MPE/IX, E3000/IX 13 Configuring Logging

13 Configuring Logging

This chapter provides step-by-step instructions for configuring logging. Logging is configured for the purpose of recording events such as errors and console commands.

Figure 13-1shows the screen flow for configuring the logging screens. Screens unique to logging are indicated by bold boxed screens. [FUNCTION] denotes the function key used at a screen to invoke the next screen on the screen flow.

Figure 13-1 Logging Configuration Screen Flow

Open Config/

Directory File Screen

	[OPEN CONFIG]
Main Screen			If you have not created the
			config file, then press the
	[NS]		OPEN CONFIG key a
			second time.
NS Config					To enable users for individual logging
					classes, in the command window of any
	[UNGUIDED]
					screen, type the path name:
Unguided Config		[EXIT LOGGING]			@LOGGING.SUBnnnn.CLASnnnn and
					hit enter.
				[GO TO LOGGING]
			Network Log
			Config (1)			Logging Config:
	[PRV LOG SCREEN]			[NEXT SCREEN]		Class Data
			Network Log
			Config (2)
	[PRV LOG SCREEN]			[NEXT SCREEN]
			Network Log
			Config (3)
	[PRV LOG SCREEN]			[NEXT SCREEN]
			Network Log
			Config (4)
	[PRV LOG SCREEN]			[NEXT SCREEN]
			Network Log
			Config (5)
	[PRV LOG SCREEN]			[NEXT SCREEN]
			Network Log
			Config (6)
	[PRV LOG SCREEN]			[NEXT SCREEN]
			Network Log
			Config (7)

171