Configuring the Network Directory

Select Update Directory Function

Select Update Directory Function

The Network Directory Main screen (#8) in Figure 11-3is displayed when you press the [Open Directry] function key at the Open Configuration/Directory File screen (#1) in Figure 11-2.This screen is also displayed if a network directory has already been opened and you type NETDIR in the command window of any screen and press the [Enter] key.

Figure 11-3 Network Directory Main

Step 1. Press the [Update Dir] function key to modify the contents of the directory by adding, deleting and updating node names and path reports.

Function Keys This screen is the main select screen from which all directory functions are accessed. The currently opened directory is displayed at the bottom of all network directory screens. The percentage of the network directory that is full is shown in the lower right corner of the screen.

Update Dir Press this function key to go to the Network Directory Select Node Name screen to add, delete, or modify network directory node name entries and path reports.

Print Dir Press this function key to print out a copy of the directory to formal designator FORMLIST, device class LP. You can use a file equation for FORMLIST to redirect

Chapter 11

155