Configuring a X.25 Node

 

Before using NMMGR to configure a link, you should complete the

 

worksheets provided. See Chapter 4 , “Planning for Node

 

Configuration,” for more information on planning your configuration

 

and filling out the configuration worksheets.

 

This chapter includes step-by-step instructions to help you perform the

 

following tasks:

 

• Begin the configuration process.

 

• Configure an X.25 network interface.

 

• Configure neighbor gateways.

 

Once the above tasks are completed, refer to Chapter 10 , “Validating

 

and Cross-Validating with SYSGEN,” for step-by-step instructions to

 

help you perform the following validation tasks:

 

• Validate the network transport configuration.

 

• Cross-validate in SYSGEN.

 

If you are configuring X.25 iX System Access on a system that is using

NOTE

 

host-based network management (a PC running the HP OpenView

 

Network Manager is not part of the network), use Configuring and

 

Managing Host-Based X.25 Links instead of this manual for

 

step-by-step configuration instructions.

126

Chapter 8