HP E709, 6500 manual Configure and manage

Chapter 8

1

2

3

4

Telephone wall jack

Use the phone cord provided to connect to the 1-LINE port on the back of the device

You might need to connect the supplied phone cord to the adapter provided for your country/region.

Answering machine

Telephone (optional)

To set up the device with a shared voice/fax line with answering machine

1.Remove the white plug from the port labeled 2-EXT on the back of the device.

2.Unplug your answering machine from the telephone wall jack, and connect it to the port labeled 2-EXT on the back of the device.

NOTE: If you do not connect your answering machine directly to the device, fax tones from a sending fax machine might be recorded on your answering machine, and you probably will not be able to receive faxes with the device.

3.Using the phone cord supplied in the box with the device, connect one end to your telephone wall jack, then connect the other end to the port labeled 1-LINE on the back of the device.

NOTE: You might need to connect the supplied phone cord to the adapter provided for your country/region.

If you do not use the supplied cord to connect from the telephone wall jack to the device, you might not be able to fax successfully. This special phone cord is different from the phone cords you might already have in your home or office.

4.(Optional) If your answering machine does not have a built-in phone, for convenience you might want to connect a phone to the back of your answering machine at the "OUT" port.

NOTE: If your answering machine does not let you connect an external phone, you can purchase and use a parallel splitter (also known as a coupler) to connect both the answering machine and telephone to the device. You can use standard phone cords for these connections.

5.Turn on the Auto Answer setting.

6.Set your answering machine to answer after a low number of rings.

7.Change the Rings to Answer setting on the device to the maximum number of rings supported by your device. (The maximum number of rings varies by country/region.)

8.Run a fax test.

When the phone rings, your answering machine answers after the number of rings you have set, and then plays your recorded greeting. The device monitors the call during this time, "listening" for fax tones. If incoming fax tones are detected, the device emits fax reception tones and receives the fax; if there are no fax tones, the device stops monitoring the line and your answering machine can record a voice message.

If you encounter problems setting up the device with optional equipment, contact your local service provider or vendor for further assistance.

122 Configure and manage