Appendix B

4.Retain the control-panel faceplate. Do not return the control-panel faceplate with the HP all-in- one.

CAUTION: The replacement device might not come with a control-panel faceplate. Store your control-panel faceplate in a safe place, and when the replacement device arrives, reattach your control-panel faceplate. You must attach your control-panel faceplate to use the control-panel functions on the replacement device.

NOTE: See the setup poster that came with the device for instructions on how to attach your control-panel faceplate. The replacement device might come with instructions for setting up your device.

Remove the rear access panel or duplexer

Remove the duplexer before shipping the device.

ŸPush the button on either side of the rear access panel or the duplexer, and then remove the panel or unit.

Remove the output tray

Remove the output tray before shipping the device.

ŸLift the output tray, and gently pull it out of the device.

254 Support and warranty

Page 258
Image 258
HP E709, 6500 manual Remove the rear access panel or duplexer, Remove the output tray