Chapter 2

Transparencies

Insert transparencies with the rough side down and the adhesive strip pointing towards the back of the device.

Use the Normal mode to print transparencies. This mode provides longer drying time and ensures that the ink dries completely before the next page is delivered to the output tray.

Remove each sheet as it prints and set it aside to dry. Allowing wet media to stack up may cause smearing.

Custom-sized media

Use only custom-sized media that is supported by the device.

If your application supports custom-sized media, set the media size in the application before printing the document. If not, set the size in the print driver. You might need to reformat existing documents to print them correctly on custom-sized media.

Understand specifications for supported media

Use the Understand supported sizes and Understand supported media types and weights tables to determine the correct media to use with your device, and determine what features will work with your media.

Always use the correct media-type setting in the printer driver, and configure the trays for the correct media type. HP recommends testing any paper before buying it in large quantities.

Understand supported sizes

Understand supported media types and weights

Understand supported sizes

Media size

Input tray

Duplexer (some

ADF

 

 

models)

 

 

 

 

 

Standard media sizes

 

 

 

U.S. Letter (216 x 279 mm; 8.5 x 11 inches)

U.S. Legal (216 x 356 mm; 8.5 x 14 inches)

A4 (210 x 297 mm; 8.3 x 11.7 inches)

U.S. Executive (184 x 267 mm; 7.25 x 10.5 inches)

B5 (JIS) (182 x 257 mm; 7.17 x 10.12 inches)

B5 (ISO) (176 x 250 mm; 6.9 x 9.8 inches)

B7 (88 x 125mm; 3.5 x 4.9 inches)

A5 (148 x 210 mm; 5.8 x 8.3 inches)

30 Use the device

Page 34
Image 34
HP E709 Understand specifications for supported media, Transparencies, Custom-sized media, Understand supported sizes