Appendix B

Prepare the device for shipment

If after contacting HP Customer Support or returning to the point of purchase, you are requested to send the device in for service, make sure you remove and keep the following items before returning your device:

The control-panel faceplate

The duplexer

The output tray

The power cord, USB cable, and any other cable connected to the device

Any paper loaded in the input tray

Remove any originals you might have loaded in the device

This section contains the following topics:

Remove the device control-panel faceplate

Remove the rear access panel or duplexer

Remove the output tray

Remove the device control-panel faceplate

NOTE: This information does not apply to customers in Japan.

CAUTION: The device must be unplugged before following these steps.

CAUTION: The replacement device will not be shipped with a power cord. Store the power cord in a safe place until the replacement arrives.

To remove the control-panel faceplate

1.Press the Power button to turn off the device.

2.Unplug the power cord, and then disconnect it from the device. Do not return the power cord with the device.

252 Support and warranty

Page 256
Image 256
HP E709 Prepare the device for shipment, Remove the device control-panel faceplate, To remove the control-panel faceplate