HP Fax Machine Sender manual Use the following steps to verify the digital sender setup

READ

24 ￿(!￿￿￿￿￿￿)￿,￿￿￿￿￿￿￿￿￿￿￿￿￿!￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

(￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

Use the following steps to verify the digital sender setup.

￿￿￿￿￿￿￿￿￿$￿￿￿￿￿￿￿￿￿￿￿￿￿￿

1Display the Revision page to verify that the network interface card is successfully

linked to the network. TheTCP/IP status parameter should read . To display the page, select STATUS (ALT+F3), then REVISION (F1). Press BACK (F4) to close

2Test the e-mail service to confirm that the digital sender can communicate through Internet e-mail. See the user guide for instructions on sending e-mail. Be sure to type your address in the To field.

3Test the Internet fax service by sending a test fax to a local fax number.See the user guide for instructions on sending faxes.

4Test the print function by sending a document to a HPJetSend-enabledprinter. See the user guide for instructions on sending to a printer.

￿￿ )￿￿￿%￿￿&￿￿￿￿

HP Web JetAdmin is an optional utility for use with the digital sender. It is a browser- based program that lets you remotely configure, monitor, and control HP network peripherals such as printers, plotters, scanners, and digital senders. Download the HP Web JetAdmin software from the HP digital sender website (www.hp.com/go/webjetadmin/).