HP Fax Machine Sender manual To switch to Manual. Press E Nter

0￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿ ￿41

-.)￿'￿￿￿￿￿￿￿

If e-mail or i-fax documents sent by the digital sender appear too light or too dark, the problem may be solved by adjusting the contrast. Use this feature much the same way you would use a similar function on a phot ocopier:decreasing the contrast lightens the scan of the image, increasing the contrast darkens it.

￿￿￿￿$￿￿￿￿￿￿$￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

1At the control panel, press SETUP (ALT+F4). Then press SETTINGS (F2).

2Select any of the configuration menus. If an administrator password is required, the HP Digital Sender 8100C Administrator’s Password dialog box appears. Type the password and press OK (F1).

3When the configuration menu appears, press TOOLS (F2).

4Select B/W Contrast and press OK (F1).

5 By default, the digital sender is set to Automatic. Press ENTER, then use	and
to switch to Manual. Press ENTER.

6Use or to move to the contrast bar. Move the marker to the left to lighten the contrast, move the marker to the right to darken the contrast.

7Press SAVE (F1).

Note	In general, the B/W Contrast setting should be kept on Automatic unless a contrast
	adjustment is necessary to improve readability.