HP Fax Machine Sender manual Parameter Descriptions

5%￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿ ￿￿￿￿￿￿￿￿ ￿35

Revision page parameters

Parameter	Descriptions
Box Version	Product version
FW Ver.	Version of firmware installed in the digital sender.
FW Date	Release date of the firmware installed in the digital sender.
HPJetDirect Prd. #	Product number of the network interface card:
	● HPJ3113A
	Ethernet (10Base-T) networks
HPJetDirect FW Rev.	Version of firmware installed on the network interface card (G.xx.xx).
MAC Address	Unique LAN hardware address assigned to the network interface card at the
	time of manufacture (for example, 0060B072525E).
IP Address	UniqueTCP/IP address of the network interface card. This is assigned by the
	administrator
Subnet Mas	If subnets are used, the filter used to identify the subnet of the HPJetDirect
	print server (network interface card). This is assigned by the administrator.
TCP/IP statu	Status of the connection to the network:
	● INITIALIZING
	The network interface card is searching for a valid IP address. After 2 minutes, a default IP
	address is automatically assigned.
	● READY
	The network interface card has been assigned an IP address and is actively connected to the
	network.
	● ERROR
	A network or network interface card error has been detected.
Gateway Addr.	IP address of the default gateway server used to communicate with nodes on
	other subnets or networks.
Received pkts	Total number of packets received without error.
Bad packets	Total number of packets received with errors.
Framing err .	Total number of packets received that contained a CRC (cyclic redundancy
	check) or framing (alignment) error.
Transm. pkts	Total number of packets transmitted without error on the network.
Collisio n	Total number of packets that were not transmitted due to successive collisions.
Late collision	Total number of packets that were not transmitted due to late collisions
	(collisions after the 64th byte of a packet).