HP Fax Machine Sender Log Server Addr, HPJetDirect print server, HPJetDirect Cfg, HPJetDirect ID

36 ￿(!￿￿￿￿￿￿4￿,￿0￿￿￿￿￿￿￿￿￿￿￿￿

Revision page parameters (continued)

Parameter	Descriptions
Log Server Addr.	IP address of the host computer that receives syslog messages from the
	HPJetDirect print server.
HPJetDirect Cfg.	Indicates how the digital sender has received its TCP/IP configuration:
	● DHCP
	Automatically from a DHCP server
	● MANUAL
	Manually from entries made at the control panel.
HPJetDirect Timeou	Timeout value in seconds that an idle data connection is allowed to remain
	open.Valid values are 0 to 3600. A value of 0 disables the timeout mechanism.
	The default is 90 seconds.
HPJetDirect ID	HP manufacturing identification code assigned to the network interface card.
Boot BlockVer .	Version of the digital sender startup (boot) program. This information is used
	only by HP manufacturing and HP customer support.
Multi-BootVer .	Version of the digital sender multi-boot program. This information is used only
	by HP manufacturing and HP customer support.
Engine FW Ver.	Version of firmware used by the digital sender scanner engine. This information
	is used only by HP manufacturing and HP customer support.
Running Imag e	The firmware image currently running. Either 1 or 2.

(￿￿￿￿

The Tasks page lists the services running on the digital sender at that moment. Each task is assigned a Status, Error Number (Errno), and State (St). Tasks cannot be modified or deleted and are diagnostic tools that may be referred to by HPTechnical Support staff.

￿￿￿￿￿￿￿￿￿%￿￿$￿￿￿￿￿!￿￿￿￿￿￿

1At the control panel, press STATUS (ALT+F3).

2Press TASKS (F2).