HP Fax Machine Sender manual Source Description, Dir

9￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿!￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿ ￿51

,￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

	Use this procedure:
	● After initializing the address books
	● After performing a Restore to factory defaults
	● When instructed to do so by HP Customer Support
Note	This procedure will eraseany changes made to the address books and configurations since
	a backup image was created.

	￿￿￿￿￿￿￿￿￿￿￿￿$￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
	1 Make sure the computer you are using has the Backup and Restore utilities
	installed.
	2 At a command line, run Restore using the following syntax:
	restore.exe/f:Restore File/d:Digital Sender
	/p:Administrator Password/l/tr
Note	Example: restore.exe /f:c:\data\data.tgz /d:xxx.xxx.xxx.xxx /p:password /l /tr
Backup and Restore code
Source	Description
/dir	Directory must be in a volume supporting long file names.
/d	Digital sender network name or IP address.
/p	Digital sender administrator password.
/l	Log results in log file (backup.log or restore.log).
/tr	Log low level activity in trace file (backup.trc or restore.trc).
/f	Restore file, generated by previous backup.