HP Fax Machine Sender manual Enabled, Network Menu

(￿￿ ￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿ ￿27

Configuration parameters on the control panel (continued)

Parameter		Description
User self-registration		Permission for users to create their own user profile. If disabled,
enabled		only the administrator can add or change user profiles.
Network Menu
IP Configurati	o	To specify how the digital sender network interface car
		obtains itsTCP/IP configuration. Choi c e s
		● MANUAL. From the control panel.
		● BOOTP (Boot Protocol) or DHCP (Dynamic Host Configuration
		Protocol). Automatically from the network (the IP Address, IP Subnet
		Mask, and IP Gateway parameters are ignored). A corresponding server
		must be running and properly configured. The next time you open the
		configuration menu, you see the values that the network interface card
		automatically discovered. See “Assigning an IP address to the digital
		sender” on page 17 for details.
		Two things happen if you configured the IP address using
		BOOTP or DHCP and later change the IP address at the control
		panel: (1) the IP address that was assigned is released and (2)
		the setting for this parameter changes to MANUAL.
		Changing this value causes the digital sender to shut down and
		restart.
IP Address		UniqueTCP/IP network address of the HPJetDirect print server
		(network interface card) in the digital sender. Required for the
		digital sender to work.
		CLEAR sets the address to 0.0.0.0.
		Changing this value causes the digital sender to shut down and
		restart.
IP Subnet Ma	s	The filter used to identify the subnet of the network interface
		card in the digital sender.
		CLEAR sets the address to 0.0.0.0.
		Changing this value causes the digital sender to shut down and
		restart.
IP Gateway		IP address of the gateway server used to send packets off the
		local network.
		CLEAR sets the address to 0.0.0.0.
		Changing this value causes the digital sender to shut down and
		restart.