2.On the FSE server system, run the following command: fsepartition --remove PartitionName

Retrieving detailed information about configured FSE partitions

To retrieve detailed information about configured FSE partitions using the FSE command-line interface, run the following command:

fsepartition --list --detail

An example of this command output is shown in ”Excerpt from an example output of the fsepartition --list--detail command” on page 173.

To retrieve detailed information about a configured FSE partition using graphical user interface, in the FSE Management Console window, in the object tree, expand the Partitions container, and select the desired FSE partition. The retrieved details will be displayed on a property page in the right pane.

Figure 30 Retrieving detailed information for an FSE partition

NOTE: The set of partition properties that is retrieved using FSE command-line interface differs from the set that is retrieved using the FSE Management Console.

Switching the access mode for an HSM file system

The fse command provides special options that allow you to manually switch between Limited Access Mode (LAM) and Full Access Mode (FAM) for a particular HSM file system on a Windows FSE client.

Limitations

•Limited Access Mode and emergency situations

LAM was designed to provide access to online files in emergency situations, for example, if the FSE system cannot be started, the blocked Hierarchical Storage Manager (HSM) process cannot be terminated, and similar exceptional circumstances. Usually, you should avoid switching manually between HSM file system access modes, so only consider using the fse --limit-accesscommand in the cases mentioned above.

•Limited Access Mode and the fsefile --recallcommand

156 Monitoring and maintaining FSE