Parameter | Description | |
|
| |
ProcessFileFromBeginning | Analysis mode: | |
| 0 | = analyze only the |
| 1 | = analyze the entire log file (for debug purpose) |
|
| |
IgnoreCase | Case sensitivity of the regular expressions in the rules files: | |
| 0 | = regular expressions are case sensitive (default) |
| 1 | = ignore case in regular expressions |
|
| |
ServerName | Name or IP address of the SMTP server | |
|
| |
UseSMTPAuthentication | Authentication mode: | |
| 0 | = disables authentication (default) |
| 1 | = enables authentication |
| If SMTP authentication is enabled, the following parameters are also required: | |
| username | |
| password | |
|
| |
MailText | The text contained in the mail. If the text consists of several lines, the lines must | |
| start with blanks. | |
|
| |
Subject | ||
|
| |
SubjectPrefix | The text placed in front of the subject of the MailCurrentLogMessage | |
| action. For more information on the MailCurrentLogMessage action, see | |
| ||
|
| |
From | Sender | |
|
| |
To | One or more receiver | |
|
| |
AttachmentPrefix | Prefix of the analysis results file. The format of the analysis results filename is | |
| as follows: | |
| AttachmentPrefix_YYMMDD_HHMMSS.log.zip | |
| Such a naming convention ensures that the analysis results files sent to | |
| receivers are not overwritten. | |
|
| |
ZipAttachment | Compression mode: | |
| 0 | = disables the compression of attachments |
| 1 | = enables the compression of attachments (default) |
|
| |
Slot | Message packages (all filtered log messages) dispatch or dump interval in | |
| minutes | |
|
| |
DestinationIP | The IP address of the SNMP server | |
|
| |
CommunityName | A name used to group SNMP hosts. By default, all hosts belong to the public | |
| community, which is the standard name for the common community of all | |
| SNMP hosts. | |
|
| |
SenderOID | Object ID (OID) of the sender system. The OID for FSE is | |
| 1.3.6.1.4.1.18945.1.1.0. | |
|
|
|
IMPORTANT: In the general configuration file, the lines with configured parameters must not contain leading spaces.
HP StorageWorks File System Extender Software user guide 203