#=== USED TERMS ===
#AnalysisFile: The file which is analyzed by the LogAnalyzer.
# | Package: | The file, | which is produced by the LogAnalyzer. |
# |
| This file | will be attached to the email. |
[LogAnalyzer]
#===============================================================================
#This section describes internal settings of the LogAnalyzer
#===============================================================================
#
#After "SleepTime" the LogAnalyzer checks the AnalysisFile again for new Messages.
#Unit is second.
#SleepTime = 0.1
#
# | Debug | = | 0 | [DEFAULT] | ==> | No Debuginformation is | shown. |
# | Debug | = | 1 |
| ==> | Shows Debuginformation | ( Rules, Actions, etc.). |
#Debug = 1
#
#The RulesFile contains the rules for the analysis and is loaded on startup.
#NOTE: You need to provide an absolute path!
RulesFile = /etc/opt/fse/loganalyzerrules_messages.py
#
#Directory where temporary files are created.
#Defaults to the
#NOTE: You need to provide an absolute path!
#TmpDir =
#
#In this file the LogAnalyzer writes down its own activities.
HP StorageWorks File System Extender Software user guide 199