HP GbE2c Link Aggregation Control Protocol information

Show all FDB information

Command: /info/l2/fdb/dump

MAC address	VLAN	Port	Trnk	State
-----------------	----	----	----	-----
00:02:01:00:00:00	300		1	TRK
00:02:01:00:00:01	300	23		FWD
00:02:01:00:00:02	300	23		FWD
00:02:01:00:00:03	300	23		FWD
00:02:01:00:00:04	300	23		FWD
00:02:01:00:00:05	300	23		FWD
00:02:01:00:00:06	300	23		FWD
00:02:01:00:00:07	300	23		FWD
00:02:01:00:00:08	300	23		FWD
00:02:01:00:00:09	300	23		FWD
00:02:01:00:00:0a	300	23		FWD
00:02:01:00:00:0b	300	23		FWD
00:02:01:00:00:0c	300	23		FWD

An address that is in the forwarding (FWD) state indicates that the switch has learned it. When in the trunking (TRK) state, the Trnk field displays the trunk group number. If the state for the port is listed as unknown (UNK), the MAC address has not yet been learned by the switch, but has only been seen as a destination address. When an address is in the unknown state, no outbound port is indicated.

Clearing entries from the forwarding database

To delete a static MAC address from the forwarding database (FDB), see the “Static FDB configuration” section in the “Configuration Menu” chapter. To clear the entire forwarding database (FDB), see the “Forwarding Database options” section in the “Maintenance Menu” chapter.

Link Aggregation Control Protocol information

Command: /info/l2/lacp

[LACP Menu]
aggr	- Show LACP aggregator information for the port
port	-	Show	LACP port information
dump	-	Show	all LACP ports information

The following table describes the Link Aggregation Control Protocol Menu options.

Table 20	LACP information
Command	Usage
aggr	Displays LACP aggregator information for the port.
port	Displays LACP information for the port.
dump	Displays all LACP information parameters.

Information Menu 34