HP GbE2c Forwarding Database configuration, off, cur, cur, cur, add, del, cur, Table, aging, clear, static, static, Command, Command, FDB entry, FDB entry, [FDB Menu]

Table 112 Spanning Tree Port Configuration Menu options
Command	Description
link autop2pshared	Defines the type of link connected to the port, as follows:
	auto: Configures the port to detect the link type, and automatically match its settings.
	p2p: Configures the port for Point-To-Point protocol.
	shared: Configures the port to connect to a shared medium (usually a hub).
	This command only applies when RSTP is turned on. See the “Common Internal
	Spanning Tree configuration” section for more information.
edge disableenable	Enables or disables this port as an edge port. An edge port is not connected to a
	bridge, and can begin forwarding traffic as soon as the link is up. Configure server
	ports as edge ports (enabled).
	This command only applies when RSTP is turned on. See the “Common Internal
	Spanning Tree configuration” section for more information.
fastfwd disableenable	Enables or disables Port Fast Forward on the port.
on	Enables STP on the port.
off	Disables STP on the port.
cur	Displays the current STP port parameters.

Forwarding Database configurationCommand: /cfg/l2/fdb

[FDB Menu]
static	- Static FDB Menu
aging	-	Configure FDB aging value
cur	-	Display current FDB configuration

The following table describes the Forwarding Database Configuration Menu options.

Table 113 FDB Configuration Menu options

Command	Description
static	Displays the Static FDB Configuration Menu.
aging <0-65535>	Configures the aging value for FDB entries. The default value is 300.
cur	Displays current FDB parameters.

Static FDB configuration

Command: /cfg/l2/fdb/static[Static FDB Menu]

add	- Add a permanent		FDB entry
del	- Delete a static		FDB entry
clear	-	Clear static FDB entries
cur	-	Display current static FDB configuration

Configuration Menu 118