1.Lift the input tray.
2.Slide the paper width guide out as far as possible.
NOTE: If you are loading
3.Insert the media 
NOTE: Do not load paper while the printer is printing.
4.Adjust the paper width guide so it fits snugly against the sides of the paper.
Install and use the battery
The
This section contains the following topics:
•Battery safety
•Understand the battery
•Charge and use the battery
Battery safety
•Use only the battery designed specifically for the printer. For more information, see HP supplies and accessories and Printer specifications.
•When discarding a battery, contact your local waste disposal provider regarding local restrictions on the disposal or recycling of batteries. Though the
•The battery might explode if incorrectly replaced or disposed of in fire. Do not short- circuit the battery.
•To purchase a replacement battery, contact your local dealer or HP sales office. For more information, see HP supplies and accessories.
•To avoid risk of fire, burns, or damage to the battery, do not allow a metal object to touch the battery contacts.
•Do not disassemble the battery. The battery has no serviceable parts inside.
•Handle a damaged or leaking battery with extreme care. If you come in contact with the electrolyte, wash the exposed area with soap and water. If it contacts the eye, flush the eye with water for 15 minutes and seek medical attention.
•Do not charge, store, or use the battery in places where the temperature exceeds the limits specified in Operating environment.
Important notes
Take note of the following when charging or using the battery:
•Charge the battery for 4 hours before using the battery for the first time. For subsequent charges, it takes approximately 3 hours to fully charge the battery.
•The battery charge light is amber when the battery is charging. If it is red, the battery might be faulty and need to be replaced.
Install and use the battery | 17 |
