SSID: Enter the wireless SSID, which is name of your wireless network.
Security: Select the type of security you are using on your wireless network (“None” for No encryption, “WEP” for WEP encryption, etc). Press the blue key to continue.
Enter the key: If choosing a security type that requires a security/encryption code, use the mp200’s remote control and
Note: Only personal encryption modes are supported on the mp200. This includes: WEP- Open,
Note: The USB Wireless Adapter only supports 802.11n data rates (300 Mbps) when there is no wireless encryption or AES encryption. When using wireless security/encryption modes (like
Note: For an Ad Hoc wireless network, the USB Wireless Adapter supports 11 b/g modes only ( 54 Mbps maximum).
Playback Multimedia
Playback media files using an external
The mp200 supports the playback of videos, music and photos from USB devices such as a USB flash drive, a USB hard drive, or even a external USB
When you plug in a USB Mass Storage device (USB card reader, USB flash drive, etc) into the mp200, wait for about 5 seconds, and then you will see a message on screen indicating that the USB device was detected. At this point you can browse the USB device for the files that you want to playback.
To browse the USB storage device, you first select the type of files that you are looking for. Using the ◄ ► buttons on the remote control, select between: All, Music, Photo, and Video (alternatively, you can also use the buttons across the top of the remote control as a shortcut). Once you have selected the file type, you can use the ▲ ▼ buttons to select the device you want to browse, (in this example you can select “USB”), then press the “OK” button. Now use the ▲ ▼ buttons to select the USB device you want to browse (note that you can have more than 1 USB device connected to the mp200).
You can now use the ▲ ▼ buttons to move the highlight around the folders and files
20
