HP MP200 manual Spdif connection, Network connection

configure the mp200 audio output to HDMI RAW. Please refer to the audio section of the user’s manual for more information.

SPDIF connection:

Either the Basic/Advanced connection or the HDMI connection can also be used with the SPDIF connection. This connection provides 5.1 audio data to the SPDIF receiver, and then the receiver decodes it into 5.1 audio outputs.

TOSLINK cable: Connect the optical cable from this port to the SPDIF input of the audio receiver. When connecting via SPDIF, the analog stereo audio connection isn’t required.

Multichannel audio setting: To obtain multichannel audio via SPDIF, configure the mp200 audio output to SPDIF RAW.

Network connection:

Choose wired (Ethernet) for the network connection. If you have purchased the optional wireless USB adapter*, you can plug that into the USB port on the front of the mp200, and then select wireless for the network connection.

* ZW-N290

English English

9