Location

Meaning

Action

 

 

 

–303

INPRO received an error

No action is necessary because

 

indication in the DVT status

the HP protocols can retransmit

 

word returned along with the

lost messages. However, if

 

write completion of a Class I/O

enough messages are dropped

 

request. The xx field of the log

in this way so that network

 

record header contains the error

functioning is impaired, a

 

code field from the DVT status

shutdown and restart of

 

word and the yy field contains

NSARPA, or a reboot of the

 

the entire DVT status word. This

system, may be necessary to

 

is an NSARPA internal error.

clear the condition. If these

 

 

actions do not solve the

 

 

problem, notify your HP field

 

 

office.

 

 

 

–304

INPRO was unable to allocate

If too many messages are lost in

 

space in DSAM for an incoming

this way, more space should be

 

message. If the transport is

allocated for DSAM at

 

TCP, HPPXP, or the DS/1000IV

initialization time.

 

Compatible Services transport

 

 

with Message Accounting, the

 

 

message will be retransmitted

 

 

and will probably be accepted.

 

 

A Memory Manager error code

 

 

is printed in xx field of the log

 

 

record header.

 

 

 

 

–305

INPRO tried to requeue a

If this problem repeats, shutting

 

message to the message tracing

down tracing with BRTRC and

 

program, NSTRC, or to the

then restarting NSTRC may

 

interface protocol monitor, IFPM,

correct it. If not, this error

 

but the class number used was

requires HP notification.

 

rejected by the Class I/O

 

 

system. The xx field of the log

 

 

record header contains the class

 

 

number and the yy field

 

 

contains the error indication

 

 

from REQUE. This is an

 

 

NSARPA internal error.

 

 

 

 

–306

INPRO received a message

Verify that all software is of the

 

which appeared to be from a

same revision. Especially check

 

link type not supported by

revisions of datacomm drivers

 

NSARPA/1000. May represent

and the NSARPA/1000 code

 

data corruption in SAM, or

appended to INPRO (check load

 

mismatched version of INPRO

map). You may check the

 

and one of the drivers. INPRO

update time stamps on

 

dropped the affected message.

nssys_cds.lib,

 

The xx field of the log record

nslib_cds.lib, inpro.rel

 

header contains the link type

and the relocatable for the driver

 

code from the message. The

affected. If all software is same

 

log message contains the event

revision, the problem may be

 

message that INPRO would

corruption in SAM or in the

 

have sent to the link interface.

driver. Reboot. If versions

 

The first word is meaningless.

match and rebooting does not

 

 

solve the problem, this log is an

 

 

internal error and requires HP

 

 

notification.

 

 

 

648 Logging Codes and Messages