HELLO/BYE Error Codes
These error codes are returned in the err parameter of the utility subroutines HELLO and BYE.
HELLO/BYE Error Codes
Code | Meaning | Action |
|
|
|
0 | No error. | No action is necessary. |
|
|
|
1 | HELLO failure or line | Try again or report error to the |
| disconnected. | Network Manager. |
|
|
|
4 | Invalid LU: The LU specified is | Check parameters and try |
| not a communications line to an | again. |
| HP 3000, or the NS/3000 |
|
| modules are not initialized. |
|
|
|
|
5 | Timeout. | Try again. |
|
|
|
6 | Illegal (rejected) request. | Check syntax and try again. |
| Request is not recognized. |
|
|
|
|
7 | Transaction Table access error | See NSINF and DSMOD in the |
| (not enough Transaction Control | NSARPA/1000 Generation and |
| Blocks for HELLO). | Initialization Manual. |
|
|
|
8 | NonNSARPA error (for | Check syntax. If OK, consult |
| example, inputonly device | your Network Manager. |
| specified as list LU). |
|
|
|
|
Numeric Error Codes 29