BRTRC Error Messages
The following error messages are returned by the NSTRC halt program, BRTRC.BRTRC Error Messages
Message | Meaning | Action |
|
|
|
7501 NSTRC is not | NSTRC is dormant or no ID | This is an informational |
running | segment was found. NSTRC | message only. No action is |
| must be running before BRTRC | required. |
| can be used to terminate |
|
| tracing. |
|
|
|
|
7502 rteerror | An RTE error (rteerror) was | Refer to the appropriate RTE |
| encountered when BSTRC | reference manual for more |
| attempted to set NSTRC's break | information. |
| flag. |
|
|
|
|
7503 Failed Sending Stop | An RTE error (areg breg) | Refer to the appropriate RTE |
Message to NSTRC. | occurred while sending a | reference manual for more |
ABReg areg breg | message after the break flag | information. |
| was set. |
|
|
|
|
7504 Tracing is not | No class number could be found | Use NSINIT to shut down and |
enabled. | for tracing in LC or DSAM. This | reinitialize NSARPA. If the error |
| is a disastrous error. The | persists, reboot your system. If |
| storage area in DSAM has been | rebooting does not solve the |
| cleared. | problem, notify your HP field |
|
| office. |
|
|
|
7505 Access to DSAM not | mmgrerror is a Memory | This error requires HP |
allowed mmgrerror | Manager error code. A code of | notification. |
| 1007 indicates that DSAM is |
|
| corrupt; a code of 1008 |
|
| indicates that DSAM is corrupt |
|
| because of a parity error. |
|
|
|
|
52 Tracing Error Messages