HP 3150 Speed Dial number, Is not Assigned, System Error, Memory Had been received to memory

Table 9. Control panel messages

Message Cause Solution

Speed Dial (number)	You tried to dial a speed-dial code that
is not Assigned	doesn’t have a fax number stored in it or
	you assigned a non-defined one-touch
	key to a group.

Choose a speed-dial code to which you have already assigned a fax number.

System Error	An error has occurred.	Unplug the power cord from the power
		source, wait 10 seconds, and replug in
		the power cord.
		Try connecting the product to a different
		power source.
		If the error persists, record the three-
		digit error number in the message and
		see Chapter 6, “Troubleshooting.”

There are No	HP LaserJet 3100/3150 product tried to
Documents in	print faxes from memory when no faxes
Memory	had been received to memory.

No action is required. There are no faxes to retrieve.

Unrecognized	When printing, the incorrect printer driver
Format	was selected or an error occured on the
	parallel interface.

After selecting the Print command in the program from which you are printing, select the HP LaserJet 3100 or 3150 as the printer. Reprint the job. Disconnect and reconnect the parallel cable from both the product and the computer

Unsuccessful Call	The fax number entered could not be
	reached.

Check the fax number and try resending the fax.

Try to send the fax to another fax machine or try again later.

EN Control panel 51