HP 3150, 3100 Reports in extended service mode, Extended service mode reports Report Explanation

Reports in extended service mode

The chart below shows reports that can be printed from extended service mode and a brief explanation of each report:

Table 17. Extended service mode reports

Report	Explanation
T.30 protocol trace	Prints a report of the G3 protocol transmissions and receptions. See the
	section about fax trace reports later in this chapter for detailed information
	about the report.
SRAM dump	Prints SRAM address values in an address range you select.
Scanner plots	Prints the calibration page.
Log debug report	Prints detailed fax and memory address information. Fax information includes
	job number, start time used, fax ID, transmission type, pages, communication
	mode, and status.
Task stacks	Prints address locations of various tasks.
Translations	Prints text strings used in the display, beginning with the number you select.
	These text strings are printed in the language currently in use by the product.
	You can compare the numbers in this report to the numbers in an English
	report to translate non-English messages on the display.
Printer fonts	Prints all characters of fonts available in memory.
Firmware version	Shows firmware revision information on the control panel display.
(under “memory/
softswitch”)
White reference	Displays average, minimum, and maximum white reference values.
summary (under
“scanner”)

EN Service menus 195