HP 3100, 3150 manual Metal side plate removal

Metal side plate

1Remove all covers, the LIU board, the RFI shield, and the formatter board.

2Remove the two (2) screws (callout 1) from the grounding plate and lift the grounding plate from the product.

3Remove the three (3) grounding screws (callout 2).

Note	Upon reinstallation, make sure that you reinstall the grounding wires to
	their correct locations.
	4	Release the cable guide from the frame (callout 3).
	5	Remove the remaining two (2) screws (callout 4) from the metal
		side plate.

1

2

4

3

Figure 38. Metal side plate removal

6Remove the metal side plate by popping the latch on top, near the back, and lifting it away.

110 Removal and replacement EN