HP 3100, 3150 manual

7

9

10

7Place the cleaning page into the paper input bin, top first, face down.

8Print a different file.

9Inspect the page. If there are no shiny, black spots on the page’s black strip, the print path is clean. Discard the page, and the procedure has been completed.

10If there are shiny, black spots on the page’s black strip, toner has been cleaned from the print path. Discard the page. Repeat steps 1 through 9 until there are no shiny, black spots on the page.

Note

If toner specks appear often and there is a frequent need to clean the print path, try using a different type of paper, and make sure the paper meets HP paper specifications. If the problem persists, see Chapter 6, “Troubleshooting,” for detailed information about repetitive defects and other image quality problems.

64 Maintenance EN