4Pull the four (4) cables from the connectors (callout 1) aligned vertically along the right side of the formatter board, and then open the tie-wrap that holds all four cables to release the cables.

5Remove the remaining screw from the formatter board (callout 2).

2

1

CAUTION

Note

Figure 37. Formatter board removal (2 of 2)

6Remove the formatter board by lifting it up and off the hooks.

Placing the formatter board on a conductive surface can damage the board. Place the formatter board on an ESD mat.

See Chapter 6, “Troubleshooting,” for information about how to download the most recent firmware version and software program versions from the HP website (http:/www.hp.com/cposupport/). Updating the firmware and software at the same time ensures their complete compatibility.

EN

Internal assemblies 109

Page 111
Image 111
HP 3150, 3100 manual Formatter board removal 2