Message | Meaning | Action |
|
|
|
** (605) | An invalid subnet mask was | In the subnet mask, bits are set |
Invalid subnet mask | specified in the IP (DCN, GT) | to 1 for the network address and |
form. Format: 1’s | section of NSINIT. | subnet number and to 0 for the |
followed by 0’s ** |
| node number. Refer to •Subnet |
|
| Masks" in the NSARPA/1000 |
|
| Generation and Initialization |
|
| Manual. Correct the subnet |
|
| mask and rerun NSINIT. |
|
|
|
** (615) | The link LU was not specified or | If you are using NSINIT |
Invalid Link LU. (Range | was specified incorrectly. | interactively, enter an LU in the |
1..255). ** |
| range of 1 to 255. If you are |
|
| using NSINIT with an answer |
|
| file, correct the LU in the answer |
|
| file as described above and |
|
| rerun NSINIT. |
|
|
|
** (616) | A duplicate 802 link LU was | If you are using NSINIT |
Duplicate Link LU. ** | entered. | interactively, enter a |
|
| nonduplicate LU. If you are |
|
| using NSINIT with an answer |
|
| file, correct the LU in the answer |
|
| file and rerun NSINIT. |
|
|
|
** (617) | The 802 station address | If you are using NSINIT |
Invalid Station Address. | specified is not in the correct | interactively, enter a valid station |
Format is | format. The proper format is | address. If you are using |
** | NSINIT with an answer file, | |
| hexadecimal digit. | correct the station address in |
|
| the answer file as described |
|
| above and rerun NSINIT. |
|
|
|
** (618) | More than three IEEE 802.3 LUs | Rerun NSINIT. Enter less than |
many IEEE 802.3 LUs | were entered. | four IEEE 802.3 LUs for this |
entered. Terminating. ** |
| node. |
|
|
|
** (619) | A group station address was | If you are using NSINIT |
IEEE 802 Group Station | entered for the individual station | interactively, enter an individual |
address not allowed. ** | address of this node. | station address. If you are using |
|
| NSINIT interactively, correct the |
|
| station address in the answer |
|
| file as described above and |
|
| rerun NSINIT. |
|
|
|
** (620) | The destination network's IP | If you are using NSINIT |
Destination Network not | address was not specified. | interactively, enter the IP |
specified. ** |
| address of any node on the |
|
| destination network. If you are |
|
| using NSINIT with an answer |
|
| file, correct the IP address in the |
|
| answer file as described above |
|
| and rerun NSINIT. |
|
|
|
** (621) | The destination network | If you are using NSINIT |
Invalid Destination | specified is not in the form of a | interactively, enter a valid IP |
Network. ** | valid IP address. The IP | address. If you are using |
| Address format is n.n.n.n | NSINIT with an answer file, |
| where n is a number from 0 to | correct the IP address in the |
| 255. | answer file and rerun NSINIT. |
|
|
|
Program Specific Error Messages 449