TELNET User Error Messages
The following error messages are returned to the current list device when an error is encountered by the TELNET user program. After a message is printed, the user may again be presented with the TELNET prompt.
TELNET User Error Messages
Message | Meaning | Action |
|
|
|
Internal TELNET error | An internal TELNET error has | This error requires HP |
(TELNET ERR 1) | occurred. | notification. |
|
|
|
Unable to connect to | A connection could not be | (1) Verify that the target |
target computer | established to the target | computer name is correct, |
(TELNET ERR 2) | computer, because of one of the | (2) the target computer is |
| following problems: | connected to the network, |
| (1) the target computer name is | (3) that there are sufficient |
| incorrect, | system resources to establish a |
| (2) the target computer is not | connection, or |
| connected to the network, | (4) that TELNET has been |
| (3) there are not enough system | initialized on the target |
| resources, or | computer. |
| (4) TELNET has not been |
|
| initialized at the target computer. |
|
|
|
|
Input line too long | The input line was greater than | Shorten the length of the |
(TELNET ERR 3) | 80 characters. | command input line to less than |
|
| 80 characters. |
|
|
|
Cannot find closing | An opening quotation mark was | Check syntax and try again. |
quotation mark | found but not the closing |
|
(TELNET ERR 4) | quotation mark. |
|
|
|
|
Illegal command | A TELNET command was | Use HELP if necessary. Check |
(TELNET ERR 5) | entered incorrectly with the | syntax and try again. |
| wrong syntax or parameter(s). |
|
|
|
|
Unknown command | A TELNET command was | Use HELP if necessary. Check |
(TELNET ERR 6) | entered incorrectly. | syntax and try again. |
|
|
|
Input command is too big | You typed in a command with | Shorten the command, check |
(TELNET ERR 7) | more than 256 characters. | syntax, and try again. |
|
|
|
Unable to initialize | This error may be returned for | An additional error may follow |
TELNET | one of the following reasons: | this message which will offer |
(TELNET ERR 8) | (1) TELNET was unable to | further explanation. |
| acquire sufficient system |
|
| resources (such as sockets); or |
|
| (2) an error occurred in |
|
| accessing Distributed System |
|
| Available Memory (DSAM) or |
|
| tables in DSAM. |
|
| (3) user's terminal is not |
|
| connected to a DMUX or A400 |
|
| MUX, or is not a remote TELNET |
|
| session. |
|
|
|
|
Illegal escape character | An illegal escape character was | Use HELP on the ESCAPE |
(TELNET ERR 9) | entered. | command. Check syntax and |
|
| try again. |
|
|
|
42 Program Specific Error Messages