Code | Meaning | Action |
|
|
|
DS08(1) – TOO MANY | The maximum number of | Retry the request. |
UNACKNOWLEDGED MESSAGES | unacknowledged messages has |
|
BETWEEN SOURCE AND | been exceeded. |
|
DESTINATION NODE FOR |
|
|
MESSAGE ACCOUNTING |
|
|
|
|
|
DS08(2) – INSUFFICIENT | (EXECM) Possibilities are: (1) | Check resources or inform your |
RESOURCES | Class I/O error or insufficient | System Manager. |
| SAM for class I/O Read, Write, |
|
| or Control request; (2) Class I/O |
|
| error or insufficient EXECM's |
|
| internal usage; (3) Attempted I/O |
|
| request to a disk LU. |
|
|
|
|
DS08(3) – INSUFFICIENT | (EXECW) Possibilities are: (1) | Check resources or inform your |
RESOURCES | String could not be passed to | System Manager. |
| scheduled program; (2) APLDR |
|
| could not be scheduled. |
|
|
|
|
DS08(4) – INSUFFICIENT | (#RQUE) Possibilities are: (1) | (1) In the case where a slave |
RESOURCES | The number of requests queued | simultaneously serves a number |
| on a slave program's class has | of masters which exceeds the |
| exceeded the limit of 10. (2) | queue limit, try to reduce the |
| The LU, onto which the class I/O | time a slave takes to process |
| request is to be requeued, is | and reply to each request; (2) |
| down; (3) The EQT, onto which | Up the LU; (3) Up the EQT; (4) |
| the class I/O request is to be | Check resources and try again; |
| requeued, is down; (4) The | (5) Try again. |
| destination class queue cannot |
|
| contain another outstanding |
|
| request; (5) RTE rejected the |
|
| Rethread request. |
|
|
|
|
DS08(5) – NO AVAILABLE | (#MAST) All class numbers are | NSARPA monitors use class |
CLASS NUMBERS IN SYSTEM | in use. | numbers which may require |
|
| more class numbers to be |
|
| allocated at generation. |
|
|
|
DS09(0) – ILLEGAL OR | Indicates programming error. | Correct program calling |
MISSING PARAMETERS |
| parameters and rerun. |
|
|
|
DS09(1) – NOT ENOUGH | (#MAST) This is a NSARPA | Consult your Network Manager. |
PARAMETERS IN #MAST CALL | internal error. One of the |
|
| NSARPA intrinsics has called |
|
| with insufficient parameters. |
|
|
|
|
DS09(2) – NEGATIVE WRITE | (#MAST) #MAST requires | Correct call parameters and try |
DATA LENGTH IN #MAST | positive word length | again. |
CALL | specifications. DEXEC does not |
|
| support negative character |
|
| length specifications. |
|
|
|
|
DS09(3) – NEGATIVE READ | (#MAST) #MAST requires | Correct call parameters and try |
DATA LENGTH IN #MAST | positive word length | again. |
CALL | specifications. DEXEC does not |
|
| support negative character |
|
| length specifications. |
|
|
|
|
Alphanumeric Error Messages 37