LogMessage | Meaning | Action |
|
|
|
1008 | (Memory Manager) DSAM is | Reinitialize NSARPA/1000, |
| corrupt because of a parity error. | moving DSAM to unaffected |
| The error was discovered during | memory, or replace the defective |
| initialization or shut down. | memory. |
|
|
|
1009 | (Memory Manager) A parameter | This error requires HP |
| value was out of range in some | notification. |
| Memory Manager call made by |
|
| NSARPA/1000 code. This is an |
|
| NSARPA internal error. |
|
|
|
|
1010 | (Memory Manager) Insufficient | If this error occurred in the event |
| memory credits are currently | log and the system is busy, no |
| available to charge against. | action is necessary. However, if |
| This error was returned to an | throughput is significantly |
| NSARPA/1000 protocol handler. | affected, or if connections are |
| In most cases, the protocol will | lost, then the size of DSAM |
| have to dispose of the memory. | should be increased. |
|
|
|
1011 | (Memory Manager) Too many | If this error occurred in the event |
| memory credits would have | log and the system is busy, no |
| been allocated to this socket or | action is necessary. However, if |
| queueing limits were exceeded. | throughput is significantly |
| This error was returned to an | affected, or if connections |
| NSARPA/1000 protocol handler. | cannot be established, then the |
|
| size of DSAM should be |
|
| increased. |
|
|
|
1012 | (Memory Manager) An | This error requires HP |
| NSARPA/1000 protocol handler | notification. |
| made a Memory Manager call |
|
| referencing an invalid buffer ID |
|
| (undefined or currently free). |
|
| This is an NSARPA internal |
|
| error. |
|
|
|
|
1013 | (Memory Manager) A request to | This error requires HP |
| allocate an MACCT could not be | notification. |
| satisfied. This is an NSARPA |
|
| internal error. |
|
|
|
|
1014 | (Memory Manager) An MACCT | This error requires HP |
| reference did not reference a | notification. |
| valid MACCT. This could be |
|
| caused if the reference did not |
|
| point to an MACCT, or if the |
|
| MACCT was free. This is an |
|
| NSARPA internal error. |
|
|
|
|
1015 | (Memory Manager) The MBUF | This error requires HP |
| chain contained less than the | notification. |
| number of bytes the operation |
|
| required. This is an NSARPA |
|
| internal error. |
|
|
|
|
1016 | (Memory Manager) The capacity | This error requires HP |
| of the area is not large enough | notification. |
| to hold all the data in the MBUF |
|
| chain. This is an NSARPA |
|
| internal error. |
|
|
|
|
Logging Codes and Messages 617