Code | Meaning | Action |
|
|
|
66 | Not a VC socket. The descriptor | One or both of the following |
| specified in the parameter | actions may be taken: (1) Verify |
| reserved for VC socket | that the descriptor specified was |
| descriptors did not describe a | the one that the calling process |
| VC socket. | intended to specify; (2) verify |
|
| that the original call to create the |
|
| VC socket succeeded. |
|
|
|
68 | This error on IPCRecv indicates | Expect no more data from the |
| that all the data sent by the | remote process on this socket. |
| remote process has been |
|
| delivered to the user and that |
|
| the remote process has |
|
| gracefully released this socket. |
|
|
|
|
70 | Cannot give. The calling | Do one of the following: (1) Wait |
| process attempted to give away | and try again (some of the |
| one too many descriptors. This | descriptors may have been |
| problem may occur only after a | •gotten" by this time); (2) |
| calling process has given away | consider that the program(s) |
| several descriptors, but those | that were supposed to retrieve |
| descriptors have not yet been | the previously given descriptors |
| •gotten" by other processes. | may not have run properly. |
|
|
|
74 | Illegal request. The request | One or both of the following |
| code passed in an IPCControl | actions may be taken: (1) Verify |
| request was not valid. | that the request code specified |
|
| was the intended one; (2) verify |
|
| that the request code is |
|
| supported on the local system |
|
| (see •Network Interprocess |
|
| Communication" of NS |
|
| ARPA/1000 User/Programmer |
|
| Reference Manual). |
|
|
|
76 | Illegal timeout. The | One or both of the following |
| IPCControl or IPCSelect | actions may be taken: (1) Verify |
| request invoked by the calling | that the timeout value specified |
| process specified a timeout | was the intended value; (2) see |
| value that was invalid. | •Network Interprocess |
|
| Communication" of |
|
| NSARPA/1000 |
|
| User/Programmer Reference |
|
| Manual to make sure the value |
|
| is acceptable. |
|
|
|
98 | Bad vector data length. The | Recheck the initialization of the |
| calling process specified a data | data vector. |
| vector argument that contained |
|
| a negative length field. |
|
|
|
|
Numeric Error Codes 217