RMOTE Commands
EX
Terminates RMOTE execution.
EX
LL
Changes the $STDLIST device.
| LL,lu |
lu | The logical unit number of the new $STDLIST device at the |
| local node. |
MO
Moves files between an HP 1000 and an HP 3000.
If input is from an interactive LU, RMOTE prompts for data with a slash (•/"). CONTROL D terminates a data entry.
HP 1000 to HP 3000 File Transfer Format
When a file is moved from an HP 1000 to an HP 3000 (•$" prompt), use the following command:
MO | ,filedesc | ,filename | [,UN] |
|
| :CC |
|
| |
|
|
| |||||||
,lu |
|
| :SP |
| |||||
| |||||||||
|
| ||||||||
filedesc |
|
|
|
|
| ||||
The file to be transferred. | |||||||||
lu |
| The logical unit that specifies the location of the file to be | |||||||
|
| moved. Must be less than 64. | |||||||
filename | The filename created on the HP 3000. If the length of the file | ||||||||
|
| to be transferred is more than 1023 records, a larger file size | |||||||
|
| must be established on the HP 3000 before the move can be | |||||||
|
| successfully completed. To set the file size, switch to the | |||||||
|
| HP 3000 and type: | |||||||
|
| #FILE filename;DISK=number of records | |||||||
|
| Then switch back to the HP 1000 to complete the move under | |||||||
|
| the HP 1000 •$" prompt. Any MPE file attribute can be | |||||||
|
| changed from its default by using the FILE command. This | |||||||
|
| equation does not alter the characteristics of an existing file. | |||||||
UN |
| Indicates the file is to be written as fixed length records. | |||||||
|
| RMOTE uses a default size of 80 characters, but this can be | |||||||
|
| overridden by the MPE FILE command. | |||||||
CC |
| Indicates column 1 is to be used for carriage control at MPE. | |||||||
SP |
| Indicates the RTE file is spooling system format. I/O control | |||||||
|
| embedded in the file will be translated to MPE carriage control | |||||||
|
| characters. |
92 REMOTE