|
| DCONT |
| Table 101. DCONT Function Codes | |
|
|
|
FUNCTION CODE | FUNCTION | DEVICE |
(OCTAL) |
|
|
|
|
|
00 | Unused | Magnetic Tape Cartridge Tape Unit |
01 | Write end6of6file | Magnetic Tape Cartridge Tape Unit |
02 | Backspace one record | Magnetic Tape Cartridge Tape Unit |
03 | Forward space one record | Magnetic Tape Cartridge Tape Unit |
04 | Rewind | Magnetic Tape Cartridge Tape Unit |
05 | Rewind Standby Rewind | Magnetic Tape Cartridge Tape Unit |
06 | Actual Device Status | Magnetic Tape Cartridge Tape Unit |
|
|
|
07 | Set end6of6tape | Paper tape/TTY |
10 | Generate leader/Write end6of6file if not | Paper tape/TTY Cartridge Tape Unit |
| just written or not at load point |
|
|
|
|
11* | List output line spacing | Line printer |
|
|
|
12 | Write 3 inch inter6record gap | Magnetic Tape |
13 | Forward space one file | Magnetic Tape Cartridge Tape Unit |
14 | Backspace one file | Magnetic Tape Cartridge Tape Unit |
|
|
|
15 | Conditional top6of6form | Line Printer or Display Device |
|
|
|
20 | Enable terminalPallows terminal to | Codes 20627 are defined for a keyboard |
| schedule its program with any | terminal (DVR00). Refer to the DVR00 |
| keystroke | manual, 29029660001 for other uses. |
21 | Disable terminalPinhibits scheduling of |
|
| terminal program |
|
22 | Set timeoutPsets new timeout interval |
|
23 | Ignore all further requests until the |
|
| request queue is empty, an input |
|
| request is received, or a restore control |
|
| request is received |
|
24 | Restore output processing (this request |
|
| is usually not necessary) |
|
26 | Write end6of6data | Cartridge Tape Unit |
27** | Locate file number | Cartridge Tape Unit |
|
|
|
* When function code 11 is specified in con1, then con2 must be included in the parameter list to specify the particular line spacing.
** When function code 27 is specified in con1, then con2 must be included in the parameter list to specify the particular file number.
Remote File Access 105