TY

Specify the type of information that you want to trace.

AP

TY DA:numWords

HE

NO

AP

Trace message header and appendage.

DA:numWords

Trace message header, appendage, and numWords words of

 

data. numWords must be an integer between 1 and 135.

HE

Trace message header.

NO

Trace nothing. QUEX/D3KMS will not write any records to the

 

trace file, but the file will still be open and tracing will still be

 

enabled.

UP

Restart tracing if an error has occurred while writing to the magnetic tape.

UP

TRC3K Scheduling

[RU,]TRC3K[,commandInput][,loggingInput][,outputDevice]

commandInput

The LU or FMGR file to provide TRC3K commands.

 

Default: Local LU 1 (scheduling terminal).

loggingInput

The LU of the magnetic tape device with the tape where the

 

traced records were logged. QUEX/D3KMS must not be

 

writing to this LU while TRC3K is reading from it. If you enter

 

a negative number, TRC3K will terminate. If not specified,

 

TRC3K prompts you for a magnetic tape LU.

outputDevice

The LU or file to which TRC3K will print the formatted output.

 

If outputDevice is a file, it must be an existing FMGR file.

 

Default: commandInput if it is interactive, or local LU 1

 

(scheduling terminal).

TRC3K Operation

If you did not specify loggingInput, TRC3K prompts you for the LU of the magnetic tape device with the tape where the traced records were logged:

LOGGING INPUT:

Enter the magnetic tape device LU, as specified above.

Maintenance Utilities 1411