REMAT Commands
AT
Attaches to an account at a remote Session Monitor node. Do not use this command if you want the default account, if the remote node does not have Session Monitor, or if the remote node is an RTEA system.
AT[,user.group[/password]][user.group[/password]]
user.group/password The account and optional password in the corresponding node for which a noninteractive session is to be created and to which subsequent REMAT commands will noninteractively attach.
Previous session at this node will be released. For nonsession access, this parameter is password only. The first parameter indicates the logon at NODE1; the second parameter is the logon at NODE2. The AT command must be specified with one or the other; it is meaningless without parameters. User, group, and password may each be up to 10 characters in length.
BC
Broadcasts a message to each node in your Nodal Routing Vector.
BC,message
message | An ASCII string of up to 72 characters in length. |
CL
Lists the mounted cartridges at the currently switched node (NODE1) on a local list LU.
| CL[,LU] |
LU | The logical unit number for the local list device. Must be less |
| than 64. If LU is not specified, the current list device set up by |
| the LL command, or the list LU assigned by REMAT. |
CR
Creates a disk file on the currently switched node (NODE1). No data is transferred to the file.
CR,namr |
|
namr | A file descriptor that describes a FMGR file. It must not be a |
| logical unit number. All omitted subparameters (except |
| filename) default to zero. However, the file type and file size |
| must be specified as greater than zero or an error will be |
| returned. |
82 REMAT