SET
Set the characteristics of the messages to be printed by the PRINT command.
C[LASS]=value
E[NDREC]=value
R[TENO]=value
S[ET] STA[RTREC]=value . . .
STR[EAM]=value
@
CLASS | Select only the message records that belong to the class |
| specified by value. For a list of message classes and the |
| corresponding messages, refer to the NSARPA/1000 Error |
| Message and Recovery Manual. |
ENDREC | Select the records on the tape with record numbers less than or |
| equal to the number specified by value. The record numbers |
| are the tape's sequential record numbers. |
| Default: the highest (last) record number in the file. |
RTENO | Select only the message records generated by the RTE process |
| number specified by value. The RTE process number is the |
| user's terminal LU. |
STARTREC | Select the records on the tape with record numbers greater than |
| or equal to the number specified by value. The record |
| numbers are the tape's sequential record numbers. |
| Default: the first record number (number 1) in the file. |
STREAM | Select only the message records that belong to the stream type |
| specified by value. For a list of message streams and the |
| corresponding messages, refer to the NS Message Formats |
| Manual. |
value | Integer value from x to y, or @ to clear the value. For STREAM, |
| this value is an octal number. |
@ | Clear all the values set. |
1414 Maintenance Utilities