|
| Table 141. NSINF Commands | |
|
|
|
|
Command |
|
| Description |
|
|
|
|
? | Prints the NSINIF main menu. | ||
|
|
|
|
A | Prints the local node's name, addresses, and Gateway Table (GT) as | ||
| configured via NSINIT. Used to check the gateway or routing configuration. | ||
|
|
|
|
B | Prints Buffer and Memory Manager statistics. | ||
|
|
|
|
C | Prints the configured resources for the NS and ARPA Services. Used to | ||
| check if there are enough resources available. | ||
|
|
|
|
I | Prints transmit LUs of NS6ARPA/1000 link interface cards generated in the | ||
| system. Used to verify the card configuration. | ||
|
|
|
|
L | Reads the NS6ARPA link interface card statistics and IFT extent word | ||
| information. NSINF will prompt you for a link interface card LU. Used to | ||
| verify the card configuration. | ||
|
|
|
|
M | Prints Message Accounting (MA) information for each node in the NRV with | ||
| MA enabled. | ||
|
|
|
|
N | Prints the Nodal Routing Vector (NRV). | ||
|
|
|
|
P | Prints socket record and protocol path record information for the sockets | ||
| owned by a program. NSINF will prompt you for a program name. Used to | ||
| troubleshoot a user program. | ||
|
|
|
|
R | Prints information about the local node's Router/1000 links. | ||
|
|
|
|
S | Prints information about the open VC and CALL sockets. | ||
|
|
|
|
T | Prints the number entries in the Master Transaction Control Block (TCB) list, | ||
| Slave TCB list, and Process Number Lists (PNL). | ||
|
|
|
|
U | Prints information about the NS6ARPA message tracing utility (NSTRC) and | ||
| the NS6ARPA event logging monitor (EVMON). Used to check the status of | ||
| tracing and logging. | ||
|
|
|
|
V | Prints information about NS6ARPA/1000 resource numbers, information about | ||
| DS/10006IV Compatible Services system resources and configuration values, | ||
| and LU table and links used for DS/10006IV Compatible Services (RTE6MPE). | ||
|
|
|
|
W | Prints information about TELNET virtual terminal sessions, both initiated at | ||
| and remotely connected to the local node. Use to troubleshoot TELNET. | ||
|
| ||
Display | When more than one screenful of information needs to be displayed, NSINF | ||
Commands | prompts you to continue or to end the display. Enter one of the following | ||
| commands. | ||
|
|
|
|
| + or | RETURN | or spacePdisplays the next screen of information. |
| A or QPaborts the display. | ||
| ZPsuspends NSINF display. | ||
|
|
|
|
142 Maintenance Utilities