HP PART NUMBER: 461487-401A manual Multiboot kernel must be loaded before modules

Unable to download the log files from the migration wizard when using IE 9

While using IE 9, you are unable to download the log files from the migration wizard.

Suggested action

Perform the following steps:

1.From the IE 9 browser, click Tools→Internet Options.

2.Click Advanced and navigate to Security section under Settings.

3.Clear the Do not save encrypted pages on disk check box.

4.Click OK.

This will enable you to download the log files.

Microsoft Windows 2008 R2 SP1 does not boot on ProLiant BL420c Gen8 with Emulex LPe1205A FC storage controller.

After a successful migration of Windows 2008 R2 SP1 to ProLiant BL420c Gen8 configured with Emulex LPe1205A FC storage controller, the OS does not boot up on the destination server.

Suggested action

Perform one of the following:

•During migration, make PSP installation as the default option.

•If a 'No Disk Error' is preventing the OS from booting after migration, reboot directly from the iLO console and disable the secondary storage controller driver - Emulex LPe1205A from the Windows Device Manager.

•Migrate the OS with PSP uploaded in Upload Drivers tab.

Source server with SLES 11 SP2 x32 OS does not boot the operating system properly after successful migration

Source server with SLES 11 SP2 x32 OS does not boot the operating system properly after successful migration.

Suggested action

After the migration, restart the source server manually.

RHEL version 6.3 (x64) operating system does not boot after migrating to HP Dynamic Smart Array B120i/B320i Controllers

After performing a successful V2P migration of RHEL version 6.3 (x64), the operating system does not boot up on destination with HP Dynamic Smart Array B120i/B320i Controllers.

Suggested action

Perform the following:

1.Disable VT-d in RBSU.

2.Uninstall virtualization package before migration.

3.Remove the parameter "intel_iommu=on" in grub menu.lst.

RHEL version 6.3 (x64) operating system does not boot as destination after successful migration

After a successful X2V migration, the RHEL version 6.3 (x64) OS does not boot up on Hyper-V/ESX as destination and displays the following error message:

Multiboot kernel must be loaded before modules.

Postmigration 71