NOTE Printing only works with still images; it does not work with video clips. Also, images within a panoramic sequence can be printed individually directly from the camera, but you cannot print an entire panorama from the camera. To print a panorama, see Printing Panoramas on page 99.
1Check that the printer is turned on. There should be no blinking lights on the printer or error messages displayed about the printer. Load paper into the printer, if needed.
2Connect your camera to the printer.
•If you are printing directly to an HP printer that does not display the PictBridge logo (see below), use the special USB cable for connecting the camera directly to an HP printer. Connect the square end of that USB cable to the HP printer.
•If you are connecting the camera to a printer displaying the PictBridge logo (see right) from HP or another manufacturer, do the following:
a.Make sure your camera is set to the Digital Camera USB Configuration setting (see USB Configuration on page 106).
b.Using the USB cable that you would normally connect between the camera and the computer, connect the larger, flat end of the USB cable to the corresponding connector on the Pictbridge printer.
Chapter 5: Transferring and Printing Images | 101 |