Date & Time

This setting allows you to set the date/time format, as well as the current date and time for the camera. This is usually done when you first set up the camera; however, you may need to re-set the date and time when you are travelling to different time zones, or if the date and time is incorrect.

NOTE The date/time format chosen will be used to display the date information in Playback. Also, this format chosen in this setting is what is used in the date & time imprint feature (see Date & Time Imprint on page 67).

1In the Setup Menu (page 103), select Date & Time.

2In the Date & Time sub-menu, adjust the value of the highlighted selection by using the buttons.

3Press the buttons to move to the other selections.

4Repeat steps 2 and 3 until the

correct date/time format, date, and time are set.

5Press Menu/OK to save the setting and return to the Setup Menu.

The new setting remains in effect until it is changed again, even when you turn the camera off.

Chapter 6: Using the Setup Menu

105