Charging the Battery

NOTE This section tells how to charge a battery in the camera. You can also charge the battery in the extra battery bay of the camera dock or in the HP Photosmart Quick Recharger (see Appendix B: Purchasing Camera Accessories on page 161).

1Plug the power cord into the HP AC adapter. If more than one power cord is in the box, use the cord that is appropriate for power outlets in your country. Plug the other end of the power cord into an electrical outlet.

2Open the small rubber door on the side of the camera.

3Attach the thin cord from the AC adapter to the

power adapter connector

on the side of the camera as shown.The Power light on the top of the camera will start

blinking to show that the battery is charging.

The rechargeable lithium ion battery will usually charge fully in 4-6 hours. When the Power light stops blinking, the battery is fully charged, and you can then unplug the power adapter from the camera. You can continue to use the camera while the battery is being charged by the power adapter.

NOTE The camera may get warm while it is charging the battery, as well as after prolonged use under battery power. This is normal.

16

HP Photosmart R507/R607 User’s Manual