3Open the rubber door on the side of the camera and connect the small end of the USB cable to the USB connector on the camera.

4When the camera is connected to the printer, a Print Setup menu displays on the camera. If you already selected images to print

using the camera Print button, the number of images selected is shown. Otherwise, Images: ALL is

displayed. To select or change the selections of images to

print, press the Print button, scroll through the images using

the buttons, then use the buttons to adjust the number of copies for each image. When satisfied with your selections, press the Print button again to return to the Print Setup menu.

5If all the settings in the Print Setup menu look correct, press Menu/OK on the camera to begin printing. Or, you can change settings in the Print Setup menu using the arrow keys on the camera, then follow instructions on the screen to begin printing.

NOTE There is a print preview in the lower right-hand corner of the Print Setup screen showing the page layout that will be used for printing images. This print preview updates as you change the settings for the Print Size and Paper Size.

102

HP Photosmart R507/R607 User’s Manual