USB Configuration

This setting determines how the camera is recognized when connected to a computer.

1In the Setup Menu (page 103), select USB.

2In the USB Configuration sub-menu, highlight one of these two choices:

Digital Camera—Causes the computer to recognize the camera

as a digital camera using the Picture Transfer Protocol (PTP) standard. This is the default setting on the camera.

Disk Drive—Causes the computer to recognize the camera as a disk drive using the Mass Storage Device Class (MSDC) standard. Use this setting to transfer images to a computer that does not have the HP Image Zone software installed on it (see

Transferring Images to a Computer without HP Image Zone Software on page 114). This setting may not work with a Windows 98 computer that does not have the HP Image Zone software installed on it.

3Press Menu/OK to save the setting and return to the Setup Menu.

The new setting remains in effect until it is changed again, even when you turn the camera off.

106

HP Photosmart R507/R607 User’s Manual